Yangjiang public building planning and design, or choose to institute Bor Green! 
 With the continuous development of people-family residential design and planning have become increasingly demanding, living environment, architectural design, space standards, spatial layout has increasingly become the focus of attention, the concept of green and healthy living been firmly established. So how to meet human health standards for the construction of the living environment, how to build a residential community benefit human health? 
 Green Design Group Co., Ltd. Bor Hong Kong HONGKONG GREEN PLANET DESIGN GROUP LIMITED 
 Founded in Hong Kong and in Shenzhen, China have set up branch offices, business scope including: architectural design, urban design, planning and design, landscape design, environmental design, interior design, urban design and technical consulting, project planning and management. We uphold the professional and efficient design approach, take seriously each design, the overall co-ordination to ensure the planning, construction to environmental design continuity. International design company background, from different regions of the design elite experienced a wide range of design team. Management company in China, the practice to rely on Hong Kong headquarters, the center of Shenzhen, Shenzhen companies with a global vision of technical support, overall planning of each project to ensure that the conditions of the most efficient and comprehensive design results and professional service quality. 
 With the rapid growth of our business, we always adhere to the attitude of enthusiasm and professionalism to provide customers with better quality and creative design services, the pursuit of excellence, customers rely on to become a partner. And efforts to enhance self-improvement, the design of global competition, market competition, China's design in creation of the brand, to contribute to the construction industry. 

 Company Name: Hong Kong Design Group Co., Ltd. Green Bor 
 Website: www.sztdt.com/ 
 Tel :0755 -82,416,852 
 Fax 755 -82416852 
 Mobile: 13510736342 
 Contact: Luo workers 
 QQ: 1910805822 
 E-mail: 19108058222@qq.com 
 Code: 518029 
 Address: Futian District, Shenzhen, China Hao Building, Bagua four in the fourth floor 
 The following information is for reference only, and not the company's services: 




 The pouring principle that the first high-strength grade concrete pouring, low-intensity level after pouring concrete, pouring column strict control prior to pouring the concrete slab before the initial setting of concrete, well in advance 

 Technical tests and preparation. Using sub-slab of concrete vibrator method, that is again before the initial setting of concrete vibrated times, to enhance the interface of high and low intensity level of the density of the concrete to reduce shrinkage. In 

 Relatively large cracks in the side of the beam to increase the level of structural steel to improve the crack resistance of the beam. Strict control of the slump of the concrete mixture, the node uses the core area of ??concrete columns tower site 

 Hanging conveyor, in order to reduce the slump. In the field, each vehicle should be concrete slump testing. Strengthen the concrete curing, especially beams, in addition to the board outside watering should be watered in the plate under the beam side 

 In load-bearing scaffolding is not removed before the full house, you can use water cannons to water conservation on the beam, beam side of the mold and delayed removal time. Conclusion The high-rise building frame structure node, there is mixed column 

 Strength grade concrete floor slab higher than the same situation, the usual construction method is to pour the concrete strength at the nodes of high grade core, and then again before pouring in the initial setting of concrete slab. As long as taken 

 Specific measures in place, and careful construction, the level of strength grade concrete beam-column joints near the junction of cracks can be avoided a direct invasion of the room, walls and floor will be soil to 

 Surges. Basement of brick masonry structure, should be done to deal with moisture, prevent soil and surface water in the capillary water infiltration caused by water pressure on the basement without causing erosion. Basement moisture structure 

 The requirement is to be made using cement mortar masonry wall and the mortar joint and full; set moisture level, moisture level, including vertical and horizontal moisture vapor barrier layer. Vertical moisture barrier installed in the outside wall, like the first wipe 

 Thick cement mortar, and then brush the base oil and cold hot asphalt road to the outdoor terrace slope at the bulk water, and then backfill around the outside of the moisture-proof layer of low permeability soil clay wide dust, etc., and compacted layer by layer 

 To prevent surface water influence. Level moisture level must be set two. Road located in the basement floor near the floor as in the structure of layers, and the other located in the outdoor channel slope above the ground the location of bulk water to 




 Links: www.youhua365.com, www.sz10050.com, www.e63.com.cn, www.zhuanhualu.com, www.cnxmht.com, www.sunloading.com, www.huanengzhongtian.com, www.cnkehui . com, www.siqingcha.com, www.lh99.com.cn, www.liuxiaoyang.com.cn, http://t.qq.com/hubinseo, www.szheda.com, www.szjzxj.com, www . chinaccve.com, 
 www.tangrendc.com, www.zhuanhualu.com / hubin 
 www.bjjingpeng.com www.bjguoan.com 
 www.huboyan.com www.ssll99.com 


 Yangjiang public building planning and design, or choose to institute Bor Green!